Service - Fantasea F580EX Using Manual

Flash housing for canon 580ex speedlite
Hide thumbs Also See for F580EX:
Table of Contents

Advertisement

service. Please put a note inside to indicate the nature of the accident, so that we can assess the course of
action to take to renovate the housing.
Note!

SERVICE

It is recommended to have annual maintenance of all Fantasea housings. It is likewise recommended to use
an authorized Fantasea Service Center for this purpose. Please contact Fantasea Line by email:
service@fantasea.com
ensure the continued performance of your housing, it should be serviced every year, or after every 200 dives.
Please note the terms for servicing the housing posted on our website. A full service will include:
Inspection of all components for wears or damage (report if repair necessary)
Cleaning of all sealing surfaces, and replacement of all O-ring seals.
Hydrostatic pressure test
Note: the replacement of damaged components (except replacement O-rings) may require additional cost.
Always take the first dive without your flash in the housing just to make sure there is
no leakage from damage to the housing. During the dive—especially at the beginning
of descent—take special care to look at the housing to make sure no bubbles are
escaping from it and that no water is entering. Generally, if there is a problem with the
seal, you will discover it in the first seconds of the dive.
or visit the Fantasea Customer Service section on the web site www.fantasea.com. To
15

Advertisement

Table of Contents
loading

Table of Contents