Toshiba 55VX700U Owner's Manual page 28

How to navigate the menu:
> Main menu > Submenu > _
Press the MENU button.
Press < or • to select a menu
> Main menu icon (PICTURE, SOUND,
APPLICATIONS,
PREFERENCES, SETUP)
> Submenu Press • or • to select a desired
menu.
> ',_) Press the OK button
Changing Initial settings
From Quick Setup:
1 _
> SETUP > Quick Setup > '_).
2 A confirmation message appears. Press < or • to
select Yes. Press _.
3 To change settings, see "Initial Setup" (_#r' p. 25).
From individual setting:
Menu language
You can choose from three different languages
(English, Franq:ais and Espahol) for menus and
messages
1 _
> SETUP > Menu Language.
2
Press
< O1" •
to select your preferred language. Press
LocalTimeSetting
This setting allows you to specify the correct time zone
for your region.
1 _
> SETUP > TV Settings > _<0.
2 Press • or • to select Local Time Setting. Press _.
3 Select an option:
° Time Zone
° Daylight Saving Time
4
Press <
O1" •
to set your desire time zone o1"to select
On to activate Daylight Saving Time. Press _.
Location
You can select Home or Store for the TV location. For
normal home use, select Home.
1 _-¢
> SETUP > Location.
2
Press
< O1" •
to select Home.
Press
SmartSoundEqualizer
You can adjust the sound for the TV installation.
1 _-¢
> SOUND > Advanced Sound Settings > _).
2
Press • o1"• to select Smart Sound Equalizer.
Press (o.2).
3 Highlight TV Mounting. Select Stand or Wall.
4 If you want to adjust the equalizer, press the RED
button.
5
6
Press A, •, < or • to adjust.
Press [_ to fix the adjustment.
To cancel the selection or adjustment, select Cancel
on the screen. Press '_).
To revert the selection or adjustment to the factory
default, select Reset on the screen. Press '_.
ANT/CABLEIN
This setting configures the antenna input source for the
ANT/CABLE terminal.
1 _-¢
> SETUP > ANT/CABLE In.
2
Press <
or •
to select the input source (Antenna or
Cable) for the ANT/CABLE input. Press _.
Storingchannelsin memory
(optional)
To make your TV stops only on the channels you want
when you press (_ or _ on the remote control or the
control panel, store those channels in the TV's memory.
Auto Tuning
Note: You must setup the antenna/cable input source first.
See "Initial Setup" (_,_'p. 25).
You can set up the TV to detect all active channels in
your area and store them in its memo1T. Then you can
manually store or skip individual channels from
memory.
28