Toshiba 55VX700U Owner's Manual page 20

Usingthe TV remoteandREGZA-LINK® to controlotherdevices
To control the basic functions of connected audio/video devices using the TV's remote control, connect a REGZA-
LINK ®compatible audio receiver or playback device. The REGZA-LINK ® feature uses the CEC technology as
regulated by the HDMI standard.
" "dd"d,, =''''_
IV backpanel
Playback d evice
I (RE etc.)
Playback d evice __
(REGZA-LINK_ DVDplayer,etc.)_ HDM]
_°_'_:1 cable
To connect an audio receiver and playback devices, you will need:
° HDMI cables (_ p. 14)
Note:
• If several devices are connected, the REGZA-LINK ® feature may not operate properly.
° For proper operation, it is recommended that you use HDMI cables with the HDMI Logo (|,.J_,3_|).
Before controlling the devices:
° For an explanation of setup and operations, see "Using REGZA-LINK ®" (_ p. 38).
• Configure the connected devices. See each device's operation manual.
Note: This feature is limited to models incorporating Toshiba's REGZA-LINK. However, Toshiba is not liable for those
operations. See the individual instruction manuals for compatibility information.
When using an external AV amplifier:
Picture and sound may not be properly synchronized. In this case, adjust the delay time of sound on the AV amplifier.
Note: Control range of the delay time differs according to the device you use.
Connecting a HDMIaudiosystem
If your HDMI amplifier supports ARC, audio from the TV can be sent to the amplifier over the existing HDMI cable.
You will need:
° HDMI cable
TV back panel
AV amplifier that supportsARC
HDMI'sARC(AudioReturn Channel)feature
This feature enables the audio signal of the TV to be
sent to the AV amplifier via the HDMI cable. It will not
be necessary to connect a cable from the audio output
of the TV to the audio input of the AV amplifier to
reproduce the audio received from the tuner of the TV
through the AV amplifier.
2O