Toshiba 55VX700U Owner's Manual page 169

UsingMedia Player with DLNA CERTIFIED
TM
Server
You need to configure a home network before using this
feature (_#r_p. 22).
1 _
> APPLICATIONS > Media Player > _.
2
Press • or • to select Photo, Movie, or Music. Press
,_o_.The thumbnail (for Photo) or list of files (for
Movie and Music) appear.
3 If there is more than one media server on the
network, a list of all media servers will be
displayed. Select the server you want to use, and
press _.
Press • or • to select DMS if the selection window
is displayed.
To select a file in the list of contents:
1 Press •, •, < or • to select a file or folder.
2 Press _ to move to the next layer, or press _ to
return to the previous layer.
To close the Media Player:
Press _. The TV will return to the last-viewed channel
or video input.
To display the device information:
1 Press _ to open the Quick menu in list mode or
Multi View mode.
2
Press • or • to select Device Information.
Setting DLNA CERTIFIED
TM
Serverwaking up
You only need to complete the Media Server Setup if
you wish to use the "Wake-on-LAN" feature.
1 _ > APPLICATIONS > Media Player > _o_.
2 Press • or • to select Setup. Press _.
3 Press • or • to select Media Server Setup.
Press
_. The list that contains the currently active DMSs
and the registered DMSs appears.
4 Press • or • to select the desired device. Press '_).
The box is selected. To clear the selection, press (o_).
5 Press • to select Done. Press _.
Note:
• The setting is not saved when _ is pressed before
Done is pressed.
• Up to 8 DMSs can be selected.
• Even if the device checked is powered off, it will be
displayed but grayed out in the Select Device window.
When _ is pressed on a highlighted grayed out item, a
confirmation of Wake-on-LAN is displayed. The TV tries
to wake up the DMS if Yes is pressed. The Server will
start if it supports Wake-on-LAN feature.
° Depending on the hardware/software configuration of
the Media Server, it may not start even if Wake-on-LAN is
sent.
• When some DMSs are connected, it may take time until
the list is displayed. The list may be refreshed by the
following operation.
- The device selection window is closed once and it is
displayed again.
- The RED button is pressed.
69