Basic On-Screen Display Setup; Vga Input Mode - EverFocus CCTV LCD Monitor User Manual

the remote control window.The effective receiving scope for the signal is 3
meters to the front of the remote control window,
1. To ensure a normal operation, the remote control should not be dropped
or damaged in any way .It should also be kept dry and away from all heat
sources.
2. Battery replacement is necessary when the remote controller acts
inconsistently or uneffective.
(b)、Choose the input source
If you hope to enjoy the picture from the external
input source ,before to select the source ,you
need to connect the devices,otherwise,when you
select the source ,the none or no signal will
appears on the screen, Press source button on
the monitor or remote control,the menu appears
on the screen ,then press source to select the
monitor item,and press" +/- (>)" to ensure it
VGA:the input source from VGA terminal output
HDMI: the input source from HDMI in terminal output
AV1/2:the input source from AV or video camera terminal output

BASIC ON-SCREEN DISPLAY SETUP

(1) Press the MENU button to see the menu
(2) press ＋ or － to select the the menu item and press SOURCE button
to select the Sub menu,
(3) press ＋ or － to adjust the settings
(4) press the MENU button to return to previous menu
10

1. VGA input mode

Picture
Color temp.
Brightness: Adjusts the brightness of the
picture. (Adjustment range:0-100)
Contrast Adjusts the difference between
the light and dark areas of the picture.
(Adjustment range:0-100)
Color temp: press">"button Change
the color intensity of the temperature
Selected (Normal.warm.cool.s-RGB. user)
USER:
USER-R : 0~255
USER-G : 0~255
USER-B : 0~255
.
11