Controls & Functions; Remote Control - EverFocus CCTV LCD Monitor User Manual

CONTROLS & FUNCTIONS
Ⅰ、Front control
(a) 5keys series
SOURCE MENU
1. POWER: Turn the monitor on or off.
2. SOURCE: Press this button to switch between input modes AV1、
AV2、HDMI 、VGA 。On-screen OSD mode, press this button (move
up or down) to select sub menu.
3. MENU ： Press to view the On-screen OSD of the unit ， Sub-
menus,features and settings differ according to input mode.on the on-
screen display, press this button to exit from main menu,sub-menus,
features and settings.
4. ∨and ∧ : Press ∨ button move down or press ∧ button move up to
to select or adjust
5. ＋ and －:. Press ＋ button to Increase or － button to decrease volume
from 1-100，on-screen OSD , press ＋ or －to adjust the settings.
6. Remote indicator:In red when standby mode,in blue when display.
Ⅱ、Remote control
(Optional)
8
- + POWER
Power
Power-s
Sensor
Freeze
Mute
Lock
∧、∨
Menu
< 、>
Auto
INFO
VGA
HDMI
AV
PIP
Source
POP
0~9
SWAP
EXIT
* Ensure the remote control is pointed toward the remote control window on
the display. No obstacles should be placed between the remote control and
Turn On & off the monitor
Back light : high, mid , low
Scale : normal, center, full
Available only built-in camera
Still : on & off
Switches the sound on or off
Menu lock: lock, unlock
Move Up / down highlight icon,
Display the main on-screen menu
Press them to turn up or turn
dowm the volume
Auto adjust (available only VGA
mode)
Press it to display information on
the monitor screen
VGA signal
HDMI signal
AV input signal
picture in picture
Press it to display and select the
available video signal
Picture on picture
available only password entered
POP & PIP function
Press this button to exit the menu
9