Connection; Rear Interface; Connection Under Various Signal Input Mode - EverFocus CCTV LCD Monitor User Manual

MOUNTING
● Place the monitor on a secure table or have it properly mounted to the
wall. Do not hang anything on the monitor.
Caution: The wall mount must bear a minimum of five timesThe monitor's
net weight without causing damage.To mount your MONITOR to the wall
You need to remove the base first before attaching the wall mount.
A. Place the MONITOR face down on a surface that is soft, yet strong
enough to hold the MONITOR.
B. Use a screwdriver to remove the screws from the four holes on each side
of the bottom of the MONITOR's base (only use with base)
2.Make sure all cables are already connected to the MONITOR.
3.Follow the directions included with the wall mount to mount the monitor
to the wall.
INACTIVE
● Unplug the monitor when unused for long periods of time.
VENTILATION
● Never cover or block the ventilation slits in the monitor. Ventilation slits
are provided to prevent the temperature from rising. A minimum distance of
at least 10 cm should be maintained around the unit for sufficient ventilation.
● Never insert any foreign object, metal or liquid into the ventilation slits, as
this could result in fire or electric shock.
● Do not install the DVR or optional equipments too close to the
monitor. Keep these equipments at least 30 cm away from the monitor.
WATER AND MOISTURE
● The monitor should not be exposed to dripping or splashing. No
objects filled with liquids should be placed on the monitor.
● Do not use the monitor near water.
● Do not touch the monitor or cable with wet hands as this may cause
electric shock or damage.
CLEANING
● Unplug the unit from the wall outlet before cleaning.
● Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for
cleaning. If dust is persistent, wipe with a slightly damp cloth.
SERVICE
● Use only the power source and connections appropriate for the monitor as
indicated on the marking label.
4
● Servicing is required when the monitor has been damaged in any way,
such as power cord or plug is damaged, liquid has been spilled,
objects have fallen into the apparatus, apparatus has been exposed to
rain or moisture, does not operate manually, or has been dropped.
4
1LCD Monitor, 1AC adapter, 1 VGA cable , 1 Audio cable , 1 User manual
3
1 Remote control (option)

1. Rear interface

Explanation of connectors
This section describes the jacks on the back panel of your MONITOR.
There are several ways to connect devices.
DC12V: Use only the power supply included with the monitor
HDMI: High-Definition Multimedia Interface) This is an external interface for
transmitting digital audio and video data.
VGA Connect your computer, or other device with a VGA output, to this
jack using a 15 pin D-sub cable.
PC AUDIO IN (Stereo mini jack) Use to obtain sound when a PC is
connected to the VGA jack. Use a 3.5 mm stereo mini pin cable
(sometimes referred to as 1/8" stereo mini pin) to connect a PC to your
MONITOR.
VIDEO INPUT (AV1/AV2 IN) Lets you connect a device that has
composite video jacks, such as a VCR or Camera
VIDEO OUTPUT (AV OUT) Composite video loop though (to another
monitor or recorder)
AUDIO L and R: AV audio interface,The left audio connector is usually
white. The right audio connector is usually red.

2. Connection under various signal input mode

（Ⅰ）Connecting with PC,DVR at VGA
CONTENTS

CONNECTION

5