Euphonix System 5 PC 254H Operation Manual page 22

Euphonix System 5 Hybrid Pilot Operation Manual
To edit plugin settings:
1. Press the Channel Insert Soft Key.
2. Press the Soft Key corresponding to the plugin to edit (Select 1–4).
The left-most four Soft Knobs now become the first four plugin parameters.
3. Turn the Soft Knobs to edit the settings.
4. If the plugin has more than four parameters, turn the Insert Parameter Scroll
Soft Knob (top-right of Soft Knobs section) to display the additional page(s).
The four left-most knobs reflect the current page of parameters.
5. Double-press the Channel Insert Soft Key to cycle through the instantiated
plugins for that channel.
6. Press the Bypass Soft Key (top-right of Soft Keys section) to toggle the plugin
between bypass and insert.
These changes are reflected in the Pro Tools Inserts view for each track.
When first instantiating a plugin on a channel, that plugin's window pops up in Pro
Tools. Subsequent plugin editing may not automatically open the plugin window. If the
plugin window is not opening when the plugin is being edited, press the Show Plugin
Soft Key in Soft Key bank 2.
Auxes
To assign a channel to an aux send:
1. Press the Assign Soft Key (second row in the main Soft Key section).
The Assign key flashes.
2. Press one of the Aux Send A–E Soft Keys in the second row to select the send
to edit.
3. Turn the ASGN Soft Knob (right-most bottom Soft Knob) to select where to
send the channel.
4. Press the ASGN Soft Knob to confirm the selection.
The send appears in Pro Tools.
5. Press the Assign Soft Key in the main Soft Key section to exit aux send assign-
ment mode.
Console/Workstation Operations
22