Table of Contents
Advertisement
Euphonix System 5 Hybrid Pilot Operation Manual
Using and Modifying Plugins
The Hybrid can instantiate and edit Pro Tools plugins.
Make sure the channel you are editing is in the first HUI since only these channels sup-
port plugin instantiation and editing. Channels on the first HUI show a blue border
around the track name in the Pro Tools Edit and Mix windows. If the channel is not in
the first HUI, use the HUI channel forward/back buttons on the CM401 Soft Keys.
To instantiate plugins:
1.
Press the Channel Insert Soft Knob.
2.
On the CM401 Soft Keys, press DSP Assign (top-left).
The DSP Assign Soft Key flashes.The left-most four Soft Knobs (emulated
HUI V-Pots) are now selectors for the first four plugins on your channel.
3.
Turn one of the knobs to cycle through plugin choices shown on the Soft Knob
key and TFT screen.
4. Press the bottom Soft Key next to that knob to confirm the selection.
5.
Repeat with the other three knobs to set the other inserts.
6.
To set the fifth insert, turn the Insert Parameter Scroll knob at the top-right
of the Soft Knobs section.
The emulated HUI display on the Touchscreen changes to show the fifth insert.
7.
Turn the Select 1 Soft Knob to select the plugin and press the Soft Key to confirm.
8.
When finished, press the DSP Assign Soft Key to exit the plugin insertion mode.
Console/Workstation Operations
21
Advertisement
Table of Contents
