Sony Handycam DCR-DVD200 Operating Instructions Manual page 97

Connecting your camcorder to your computer - Introduction
If you cannot install the USB
driver
The USB driver have been registered
incorrectly as your computer was connected to
your camcorder before the installation of the
USB driver was completed. Perform the
following procedure to install the USB driver
correctly.
1 Disconnect your camcorder from the
computer following" To Disconnect the
USB cable" (page 96).
2 Install the USB driver again following
"Installing the USB driver" (page 90).
3 Connect your camcorder to the
computer following _'Connecting your
camcorder to the computer" (page 92).
The USB driver installation and the
connection between your camcorder
and the computer is completed.
An ImageMixer Ver. 1.5 for Sony DVD
Handycam on-line help is available where you
can find detailed operating instructions for
ImageMixer software.
1 Click _) located at the top right of the
screen.
Or, click ]Start] ---* [Programs] (]All
Programs] in Windows XP) --*
{PIXELA] ---* {ImageMixer] ---* ]Help].
The ImageMixer Help screen appears.
2 Find the information you need from the
table of contents.
To close the on-line help
Click the [] button at the top right of the
screen.
If you have any questions about
ImageMixer Ver.l.5 for Sony DVD
Handycam
ImageMixer Ver.l.5 for Sony DVD Handycam
is the product of PIXELA corporation. For
details, refer to the operating instructions of
the CD-ROM supplied with your camcorder.
4
e-
_r
O
0
_,_
0
8
3
c
g
97