Sony Handycam DCR-DVD200 Operating Instructions Manual page 94

Connecting your camcorder to your computer - Introduction
For Microsoft Windows 2000
Professional users
1
Connect the AC adaptor'to your"
carIlcorder,
2 Set the mode dial to [] (Play/Edit).
3 Turn the power on your camcorder by
sliding the POWER switch upward
while pressing the green button.
4 Connect the t_ (USB) jacks of the
camcorder and the _ (USB) port of the
computer using the USB cable supplied
with your camcorder.
To disconnect the USB cable
See "To disconnect the USB cable" (page 96).
port
USBjack
l-- USB cable
Your computer recognizes the
camcorder, and the" Found New
Hardware" dialog box appears.
5
Follow the instructions given in the on-
screen messages.
The connection between your
camcorder and the computer is
completed.
94