Resetting The Unit; Detaching The Front Panel - Sony CDX-1300 Operating Instructions Manual

Fm/am compact disc player
Hide thumbs Also See for CDX-1300:
Table of Contents

Advertisement

Resetting the unit
Before operating
the unit for the first time or
after replacin_ the car battery, you must reset
the unit.
Remove the front panel and press the reset
button with a pointed
object, such as a ball-polnt
pert.
i
Reset button
Notes
• Pressing the reset button
will erase the clock
setting and some memorized
program and
memory functions.
• When you connect the power supply cord to the
unit or reset the unit, wait for about
10 seconds
before you insert a disc. If you insert a disc within
these 10 seconds, the unit will not be reset, and
you will have to press the reset button again.
Detaching the front panel
You can detach the front panel
of this unit to
prevent the unit from being stolen.
2
CRELEASE),then
slidethe
front
panel a little to the left, and pull it off
towards
you,
t
f
Notes
• Be sure not to drop the panel when detaching it
from the unit,
• Ifyou
detach the panel while the unit is still turned
on, the power wil! turn off automatically to
prevent the speakers from being damaged.
• When carrying the front panel with you, use the
suppl!ed front panel case.
Attaching
the
front
panel
Attach part (_ of the front panel to part _) of the
unit a_ illustrated
and push the left side into
position
until it dicks.
Notes
• Be sure not to attach the front panel upside down.
• Do notpress the frontpane/too
hard against the
unit when attaching it.
• Do not press too hard or put excessivepressure on
the display window of the front paneL
• Do not expose the front panel to directsunlight
or
heat sources such as hot air ducts, and do not lea ve
it in a humid place. Never leave it on the
dashboard of a ear parked in direct sunlight
or
where there may be a considerable
rise in
temperature.
Caution
alarm
If you turn the car ignition off without removing
the front panel, the caution alarm will beep for a
few seconds.
If you connect an oplaonal poweT amplifier and
do not use the built-in amplifier, the beep sound
will be deactivated.

Advertisement

Table of Contents
loading

Table of Contents