Sony KDP-51WS550 Operating Instructions Manual page 28

VHF/UHF CABLE
m
5 A/Vcable
Notes on UsingThisConnection
2
Coaxial
cable
Splitter
(notsupplied) 1
Coaxial
cable
Watch cable (un_rambled)
channels
Watch cable box (scrambled)
channels
Press W/VIDE0 l_peatedly to select the cable input (CABLE in the
illustration).
Turn on the VCR and tone it to the channel the cable box is set to (usually
channel 3 or 4). P_ss WNIDEO repeatedly to select the VCR input (V[DEO 1
in the illustration). Use the cable box to change channels.
Watch the VCR Press W/VIDE0 _peatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control If you have a non.Sony VCR you must prog_:am the _mote control. See
to operate the cable box or Programming the Remote Control on pages 49-, 0.
VCR
Activate the remote conti_l to For the cable box, press SATICABLE FUNCTION. F ortheVCR, opentheoutside
operate the cable box or VCR cove_; as shown on page 48. Then set the A/V slide switch to the position
you p_grammed for the VCR.
Control specific cable box and See Operating a Cable Box on page .- and Ope ating a VCR on page 5"1.
VCR functions with the TV
remote control
Label video inputs to easily See the instructions for setting up Video Labels on pages 103-104.
identi_" equipment connected
to the TV
27