Sony KDP-51WS550 Operating Instructions Manual page 23

Cable Box Only Forbestresults, u sethis connection if:
121 Your: cable company scrambles all channels, which requires you
to use a cable box.
121 You do not have a VCR. (If you have a VCR, see pages 24 and 26.)
Withthis connection youcan:
121 Use the TV remote control to change channels coming through
the cable box to the TV's VHFiLIHFiack. (You must first
program the remote control for: your specific cable box.)
With this connection, all channelscomeinto the TVthrough your cable box and onlyone
unscrambledsignal is sent to the "IV,so you cannot usethe dual picture features. If some
of your channelsare scrambled,but othersare not, considerusing the "Cable Box and
Cable" connection on page 21 instead,
Toconnect t he cablebox
1
Connc_ct the CATV cable to the cable box's input iack.
2 Use a coaxial cable to connect the cable box's output iack to the
TV's VH FiL_ HF jack.
3 Run the Auto Setup program, as described in "Setting L_p the
Channel Lis¢ on page 41.
CAW Coaxialcable
cable
IN _] 0UT
VHF/UHF
m
m
$$111m
Notes on UsingThis Connection
Use the cable box
Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to swish ehannels_
Set up the TV remote conb'ol Program the _mote control. See "Programming the Remote Control" on
to operate the cable box pages 49-50.
Activate the remote control to Press SAT/CABLE F UNCTION
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
swi_htog of TV channels box is set to (usually channel 3 or 4). "t'bu can use the TV's Channel Fix
teaturetolockm a,pecmcchannel. Fm dermis, see UsmgtheChannel
Menu" on page 98.