Sony SLV-AX20 Operating Instructions Manual page 73

Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use the EAC-32 antenna
connector (not supplied) to connect the
antenna to the VCR.
300-ohm twin
lead cable
EAC-32 antenna
connector (not
supplied)
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
300-ohm twin _ II
antenna, use the EAC-66 UHF/VHF band lead cable ]W[
separator/mixer (not supplied) to connect the
antenna to the VCR. ('_ _ EAC-66
UHF/VHF
I band
separator/
mixer (not
supplied)
_'
3
75-ohm coaxial -_
cable
o
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixer.
Retighten the screws.
Connect the 75-ohm coaxial cable to the mixer.
General setup information
73