Sony SLV-AX20 Operating Instructions Manual page 21

t_ The AUTO PRESET starts.
PROCESSING
L
AAA_&A'= 4
PLEASEWAIT_
vVV_tlT*"
SETUPISDONE
Normal display
Preset the cable box output channel (usually 2.3 or 4). For details, see page 33.
O Press MENU, then select SETTINGS and press OK.
O Select TUNER PRESET and press OK.
r_L_ER p_SE'_ ? I
SET VCR Plus+ CHANNELS
CLOCK SET
LANGUAGE
_RETURN
C_L_,TSETSELECT _
O Enter the cable box output channel.
Set MANUAL SET to ADD and press OK.
Cable box output channel
Press MENU to exit the menu.
ANTENNAICABLE
AUTO PRESET
IMANUAL SET I_f_DE_ _
AFT
FINE TUNING
:;:RETURN
OUITSETSELECT !,_
You have now completed hookup. If you want to use the VCR Plus+ system for
recording, go to page 37 (SLV-N60/AX20 only).
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you turn off
the VCR. "ACS" (Auto Clock Set) will flash in the display window and search for a
time signal provided by some TV channels. After that, whenever you turn off the
VCR, it checks the time and adjusts the clock, even for Daylight Saving Time.
If you want to use the timer to record right away, or if the channels in your area do not
carry time signals, set the clock manually. For details, see page 28.
Notes
• To use the Auto Clock Set feature, set the A/B switch to "A.'"
• If the clock is not set, "ACS" will flash in the display window whenever the VCR is turned
off. During this time, the VCR will search for a time signal.
Hookups 21