Sony SLV-AX20 Operating Instructions Manual page 25

Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The clock cannot be set automatically if you don't receive a channel that carries a time signal
in your area. If so, set the clock manually (see page 28).
• If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 30 minutes. If nothing happens even after you wait about
30 minutes, set the clock manually.
If you use Hookup 2, make sure you leave the cable box on.
• If the clock is not set, "ACS" will flash in the display window whenever the VCR is turned
off. During this time, the VCR will search for a time signal.
continued
Setting the clock
25