Sony SLV-AX20 Operating Instructions Manual page 10

Hookup 1
Antenna hookup
Make the following connections if you're using an antenna (if you don't have cable
TV).
[] Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
VCR
VHF/L_F
iN
Rear of TV
VHF/UHF
........... _ A Match the type of
connector on your
or VHF TV: A, B, or C.
UHF
or
VHF
--_C
UHF
I
[] Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
Rear of TV
VHF/UHF
vc.
VHF/UHF
IN
OUT
........... _IA
or
VHF
UHF
or
VHF
_ -,,,_ .............. _ C
UHF
Match the type of
connector on your
TV: A, B, or C.
For connector types
B and C, no UHF
connection is
required.
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should u_ a
U/V band mixer (not supplied). For details, see page 73.
10 Hookups