Sony DVP-M35 Operation Manual page 60

!
Pin
71
69
72
63-57
56
Signal Name
HFS/HWR
HX/HINT
HCK/HLBS
HO0/HD0-
HO6/HD6
HIO/HD7
14 GIO0/INT2
13 GIO1/INT3
12 GIO2/INT4
Function
Frame sync signal/host data write strobe signal input
for data transmission. In the serial mode, the data
transmission frame sync signal is input. In the parallel
mode, the data write strobe signal is input.
Host serial data/host interrupt signal output. In the
serial mode, the serial data is output. In the parallel
mode, the host interrupt signal is output.
TTL Clock/host low byte select signal input for host serial
datatransmission. In the serial mode, the serial data
transmission clock is input. In the para!lel mode, the
low byte select signal is input.
TTL General data output/parallel data input/output. In the
serial mode, the general data is output. In the parallel
mode, the parallel data is input/output.
TTL General data/parallel data input/output. In the serial
mode, the general data is input/output. In the parallel
mode, the low byte select signal is input.
General input/output pin
TTL General data input/output/INT2 external interrupt
signal input. Selected by the interrupt control register.
TTL General data input/output/INT3 external interrupt
signal input. Selected by the interrupt control register.
TTL General data input/output/INT4 external interrupt
signal input. Selected by.the interrupt control register.
TTL General data input/output/INT5 external interrupt
signal input. Selected by the interrupt control register.
TIL General data input/output!timer 0 external clock
input. Selected by the timer control register.
TTL General data input/output/timer 1 external clock
input. Selected by the timer control register.
TTL General data input/output. The input/output is set by
the GIO control register. The input data is set to the
general input register. The data of the general output
register is output. When using a GIO from GIO0 to
GIO5 as the interrupt signal or input clock, be careful
not to set the corresponding control bit to the output
when changing the value of the GIO control register
value.
Track counter
Track counter reference pulse signal input.
I/O
I
O/Z
I/O
I/O
lJO
I/O
I/O
11 GIO3/INT5 I/O
|
10 GIO4/TMC0 I/O
i
9 GIO5/TMC 1 I/O
8, 7_
5-1,
100-98
GIO6-GIO15 I/O
88 TTREF
TRIN 89
Type
TTL
CMOS
TTL
(Hysteresis)
TTL
(Hysteresis)
Track pulse signal input.
- 67 -