Sony DAV-HDZ273 Operating Instructions Manual page 58

(System Audio Control)
You can enjoy TV sound in this system by easy
operation.
To use this function, connect the system and the
TV with an audio cord (not supplied) and an
HDMI cable (not supplied) (page 15).
Depending on the TV, when you set the system
to the "TV/VIDEO" function, the System Audio
Control function is activated. TV sound is output
fiom the system speakers, and the volume of the
TV speakers is minimized automatically.
You can use the System Audio Control function
as follows:
• While you are watching the TV and the
function of the system is switched to "TV/
VIDEO," TV sound is output from the system
speakers automatically.
• You can control the system's volume by the
remote of the TV.
• If you turn the system offor set the function of
the system to other than "TV/VIDEO," TV
sound is output fiom the TV speakers.
You can also operate the System Audio Control
function fiom the TV menu. For details, refer to
the operating instructions of the TV.
m
• If the TV is turned oll before turning on the system,
TV sound will not be output for a moment.
• While the TV is in PAP (picture and picture) mode,
the System Audio Control function will not work.
When the TV exits PAP mode, the output method of
the TV returns to the one before PAP mode.
• If you select a TV program during DVD playback
with the system, the "TV/VIDEO" function is
automatically set to output TV sound.
• When you activate One-Touch Play during watching
TV, the System Audio Conta)l function is activated
and the TV sound is muted.
N'I
• You can connect the system and the TV audio
digitally. For details, see (page 17).
(Volume Limit)
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER* or THEATRE*, loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume. For details, see
"[VOLUME LIMITI" (page 48).
* The button name differs depending on the area.
58u_