Step 3: Performingthe Quick Setup - Sony DAV-HDZ273 Operating Instructions Manual

Step 3: Performingthe
Quick Setup
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
m
• When you connect the system and the TV with the
componeut video cord (not supplied) or HDMI cable
(not supplied), you need to set the type of video
output for matching your TV. For details, see "Setting
the type of video output to match your TV" (page 23).
i: ;; : I/(_
3
4
O
DISPLAY
m
• Make sure that the function is set to "DVD"
(page 24).
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTERI to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 22) and perform
again.
Press @ without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
5
6
Press ,1%1, t o select a language.
The system displays the menu and subtitles
in the selected language.
Press @.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
VIDEO SETUP
7
8
9
Press ,I%1,to select the setting that
matches your TV type.
• If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
116:91 (page 46)
• If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 46)
Press @.
The Setup Display for selecting the speaker
formation appears.
Press (--/-) to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound for a Room" (page 60).
SPEAKER FORMATION
STANDARD
21us