Sony DAV-HDZ273 Operating Instructions Manual page 23

4
Press t'14,to select [QUICK], then press
O.
The Quick Setup display appears.
Depeudiug ou the couuectiou of the TV
(page 15), select the type of video output of the
system.
To select the type of video signal
output from the HDMI OUT jack
When you connect the unit and the TV with the
HDMI cable, select the type of video signals
output fiom the HDMI OUT jack.
For details, refer al so to the operating
instructions supplied with the TV/projector, etc.
1 Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
2
3
4
5
6
7
Press © DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
Press I'14, to select B [SETUP],
then press @.
The optious tBr [SETUPI appear.
Press t,14, to select [CUSTOM], then
press @.
The Setup Display appears.
Press t,14, to select [HDMI SETUP], then
press @.
The optious for [HDMI SETUPI appear.
Press t"/4, to select [HDMI
RESOLUTION], then press @.
Press '1"14, to select the desired setting,
then press @.
• [AUTO (1920 x 108%)[: The system
outputs the optimal video signal for the
connected TV.
• [1920 x 1080il: The system outputs 1920
x 1080i* video signals.
• [1280 x 720p1: The system outputs 1280 x
72%* video signals.
• [720 x 480p1"*: The system outputs 720 x
480p* video signals.
* i: interlace, p: progressive
** Depending on the country model, [720 x 576p]
may appear.
Does your TV accept progressive
signals?
Progressive is the method t%r displaying TV
images which reduces flickering and sharpens
the image. To use this method, you need to
connect to a TV that accepts progressive signals.
1 Press FUNCTION +/- repeatedly until
"DVD" appears in the front panel
display.
2
3
4
5
6
7
Press O DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
Press I'14, to select _ [SETUP],
then press @.
The optious t%r [SETUPI appear.
Press t'14, to select [CUSTOM], then
press @.
The Setup Display appears.
Press t"14, to select [VIDEO SETUP],
then press @.
The optious t%r [VIDE() SETUPI appear.
Press ,I,14,to select [PROGRESSIVE
(COMPONENT OUT)], then press @.
Press '1"14, to select the desired setting,
then press @.
[OFFI: The system does not output
progressive signals. Select this setting
when:
- your TV does not accept progressive
signals, or,
- your TV is connected to jacks other than
the COMPONENT VIDEO OUT jacks.
[ON[: The system outputs progressive
signals. Select this setting when:
- your TV accepts progressive signals,
and,
- the TV is connected to the
COMPONENT VIDEO OUT jacks.
23us