Sony DAV-HDZ273 Operating Instructions Manual page 46

• [OSD] (On-Screen Display)
You can switch the display language on the TV
screen.
• [MENU] (DVD VIDEO only)
You can switch the language for the disc's
lilenu.
• [AUDIO] (DVD VIDEO only)
You can switch the language of the sound track.
When you select [ORIGINAL], the language
given priority in the disc is selected.
• [SUBTITLE] (DVD VIDEO only)
You can switch the language orthe subtitle
recorded on the DVD VIDEO.
When you select [AUDIO FOLLOWl, the
language for the subtitles changes according to
the language you selected for the sound track.
• When you select a language
in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDE(), one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
• If you select [OTHERS --+] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
from "Language Code List" (page 80) using the
number buttons.
[VIDEO SETUP]
Select settings according to the TV to be
connected.
• [TV TYPE]
You can select the aspect ratio of the connected
TV.
[16:91: Select this when you connect a wide-
screen TV or a TV with a wide mode function.
[4:3 LETTER BOXI: Select this when you
connect a 4:3 screen TV. Displays a wide picture
with bands on the upper and lower portions of
the TV screen.
[4:3 PAN SCAN]: Select this when you connect
a 4:3 screen TV. The system automatically
displays the wide picture on the entire screen
and cuts off the portions that do not fit.
• Depending on the DVD, 14:3LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
• [PROGRESSIVE (COMPONENT OUT)]
You can set the progressive signal that is output
from the COMPONENT VIDEO OUT jacks to
on/off. For details, see "Does your TV accept
progressive signals?" (page 23).
[OFF]: The system outputs interlace signals.
[ONI:
The system outputs progressive signals.
When you select
[ON1,
follow the Steps below.
1 Select [ON],then press @.
The confirmation display appears.
2 Press <--/'-)' to select [START], then
press @.
46u_