WINDOW
KIT INSTALLATION
The window kit is designedto fit into most
standard vertical and horizontalwindows, as well
as some slidingglass doors. However,it may be
necessary to modify some aspects of the
installationprocessfor certain window types.
.
Open the window or slidingdoor and adjust
the length of the window kit to fit the
opening. If the window kit is not long
enough, connect the extra window kit panel
to fit the opening.Mark and cut down a
single panel of thewindow kit if necessary.
.
Place thewindow kit between the window
and the window frame as shown in the
images to the right. Close thewindow onto
the window kit to form a tight seal.
.
Attach the exhaustduct adapter to the
window kit. Tabs located on the adapterwill
lock into placesecuring the adapterto the
window kit.
HORIZONTAL
WINDOW
Window
Slider
Kit
Maximum:
483t8_ ( 123cm)
VERTICAL WINDOW
Window
Slider
Kit
Maximum:
483/_(123em)