Regular Maintenance; Maintenance Schedule - Snapper Broadmoor 2600 SERIES Operator's Manual

Regular
Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your tractor and mower.
SAFETY ITEMS Before Every 5 Every 25 Every Every Spring &
Each Hours Hours 100 250 Fall
Use Hours Hours
Check Safety Interlock System •
Check Tractor Brakes •
Check Mower Blade Stopping Time • •
TRACTOR MAINTENANCE ITEMS Before Every 5 Every 25 Every Every Spring &
Each Hours Hours 100 250 Fall
Use Hours Hours
Check Tractor/Mower for loose hardware •
Check / Clean Radiator (If Equipped) ** • •
Check / Clean Oil Cooler (If Equipped) ** •
Check / Clean Cooling Fins (If Equipped) •
Check / Adjust PTO Clutch •
Lubricate Tractor & Mower ** •
Lubricate Rear Axle Shafts Yearly
Clean Battery & Cables •
Check Tire Pressure •
Clean Deck & Check/Replace Mower Blades** •
Perform Transmission Maint. (Varies by ***
Model)
Change Hydraulic System Filter (If Equipped) **
Check Mower Blade Timing (40" Mower) Yearly
Check Arbor Drive Belt Tension (40" Mower) Yearly
ENGINE MAINTENANCE ITEMS Before Every 5 Every 25 Every Every Spring &
Each Hours Hours 100 250 Fall
Use Hours Hours
Check Engine Oil Level •
Check / Change Engine Air Filter *
Change Engine Oil & Filter *
Inspect Spark Plug(s) *
Check/Replace Fuel Filter *
* Refer to engine owner's manual. Change original engine oil after initial break-in period.
** More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions.
*** Service after the first 50 hours of operation, then every 250 hours of operation.
24