Table of Contents
Advertisement
2.
Make sure the work table opens and closes
smoothly.
3.
reach under the work table and fully extend
the two support legs.
4.
lock the latches on the bottom of each cur-
tain into the work table.
filters
To install the filters:
1.
Install the six third stage filters into the filter
case as shown in figure 12.
third stage
Filters
inner
rail
figure 12. third stage filters (only three shown).
2.
install six second-stage filters above and
below the middle brace along the inner rails,
as shown in figure 13.
-16-
3.
Install six first stage filters (figure 14) along
the outer rails.
Filter
Case
Middle
Brace
outer
rail
the g0533 dry spray booth must be vented to
the outside of your shop or building using 12"
metal spiral wound ducting or 18 gauge rolled
galvanized steel ducts in accordance with nFpa
33 guidelines.
figure 13. second-stage filters.
figure 14. First stage filters.
Ducting
Model g0533 (Mfg. since 3/11)
Advertisement
Table of Contents
