Remote Control - Sansui SLED1980 Owner's Manual

Remote control
1
2
3--
4
5--
6--
7
8
9
10
11
12
13
14
-- 15
16
17
1 .POWER Button - Used to turn the power on/off to
the LCD TV.
2. DISPLAY Button - When you press this button,
the current information will be displayed on a
screen. To remove the display from the screen,
press this button again.
3. Direct Channel Selection Buttons (0-9) - Allows
direct access to any channel of the LCD TV.
4.- Button -This button is the "-" button used
when selecting digital channels. Also can display
the current channel number when viewing the
program.
5. MENU Button - Use to display the On-Screen
menu function.
6.CURSOR A/T/,q/I_ Buttons - Used to operate the
menu functions of the LCD TV.
7.ENTER Button - Use to enter or select
information for On-Screen operations.
8. MUTE Button - To turn off the sound, press this
button once. The LCD TV will be silenced and
the symbol "Mute" will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME)
+ or - buttons.
9.VOL (VOLUME) + / - - Press the + button to
increase, or the - button to decrease the sound
level.
10.INPUT SELECT Button - Use to change the
external input.
11 .CCD Button - Used to display the Closed Caption
menu screen.
12. SLEEP Button - To set the LCD TV to turn off
after a preset amount of time, use the SLEEP
button on the remote control.
13.PICTURE SIZE Button - Used to change the
picture size.
14.RECALL Button -This button allows you to go
back to the previous channel selected by just
pressing the RECALL button. Press this button
again to return to the channel you were watching.
15.EXIT Button - Press to remove setup menu.
16. AUDIO Button - Change sound track language.
17.CH (CHANNEL)/k / V -To change the channels
of the LCD TV.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two "AA" batteries (supplied).
3. Replace the battery compartment cover.
Use two "AA" size batteries. The batteries may last
approximately one year depending on how much the
remote control is used. For best performance, it is
recommended that batteries should be replaced on a
yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different
types.
BATTERY PRECAUTIONS
These precautions should be followed when using
batteries in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when
installing the batteries as indicated in the battery
compartment. Reversed batteries may cause
damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
• If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
• Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture. (Follow
battery manufacturer's directions.)