Table of Contents
Advertisement
OWNER'S MANUAL
GUIDE D'UTILISATION
24" CLASS LED-LCD HDTV
LED-LCD HDTV CATÉGORIE 24 PO
SLED2400
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
When shipped from the factory, the Signal Type option is set to the "Cable" (Cable Television) mode.
If not using Cable TV, set this menu option to the "Air" position.
Lorsque l'appareil sort de l'usine, l'option Signal Type est en mode « Cable » (câblodistribution). Si vous
n'utilisez pas la câblodistribution, sélectionnez l'option « Air ».
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l'appareil, veuillez lire le présent guide attentivement.
ATTENTION
ATTENTION
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
DU NUMÉRO DE MODÈLE AVANT D'APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:
www.sansuiproducts.com
Advertisement
Table of Contents
Related Manuals for Sansui SLED2400
Summary of Contents for Sansui SLED2400
- Page 1 OWNER’S MANUAL GUIDE D’UTILISATION 24” CLASS LED-LCD HDTV LED-LCD HDTV CATÉGORIE 24 PO SLED2400 ATTENTION ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur), consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-...
-
Page 2: Location Of The Required Marking
The rating sheet and the safety caution are (Part 15): on the rear of the unit. The Sansui SLED2400, LED-LCD HDTV complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. - Page 4 IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
-
Page 5: Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. -
Page 6: How To Attach The Stand
How to attach the stand NOTE: • Unplug the AC cord. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. -
Page 7: Features
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. •... -
Page 8: Table Of Contents
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...3 SAFETY PRECAUTIONS .........5 How to attach the stand ........6 How to remove the stand ........6 Features ............7 Power source ............7 Contents ............8 Parts and functions ...........9 Remote control ..........10 Antenna connections ........11 Cable TV connections ........11 Connections to other equipment .....12 TV operation... -
Page 9: Parts And Functions
Parts and functions Front Right side INPUT/ENTER button CH (CHANNEL) / /▲/▼ buttons VOL (VOLUME) +/–/▶/◀ buttons, MENU button POWER button Remote sensor To display the menu screen. Press hold VOL (VOLUME) +/– simultaneously about 1 second the menu will be appear. Power Indicator CH (CHANNEL) buttons, VOL... -
Page 10: Remote Control
Remote control 6.MENU Button - Use to display the On-Screen menu function. 7.AUDIO Button - Change soundtrack language. 8.INPUT SELECT Button - Use to change the external input. 9.PICTURE SIZE Button - Use to change the picture size. 10.RECALL Button - This button allows you to go back to the previous channel selected by just pressing the RECALL button. -
Page 11: Antenna Connections
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Combination VHF/UHF Antenna (Single 75 ohm cable) Connect the 75 ohm cable from the combination Antenna VHF/UHF antenna to the Antenna Jack. -
Page 12: Connections To Other Equipment
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the TV to a VCR Right of the unit To VIDEO/AUDIO IN... -
Page 13: Using Av Amplifier With Built-In Surround
Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. - Page 14 Connections to other equipment To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
-
Page 15: Tv Operation
Starting setup Set the Signal Type option to the appropriate position (see “Air/Cable selection” on page 18). The Auto Setup menu appears the first time you Press the Direct Channel Selection (0-9, –) turn on the TV, and assists you to specify the buttons to select the channel. -
Page 16: Quick Guide For Menu Operation
Quick guide for menu CH +/- Press and release CH + / –. The channel operation automatically stops at the next channel set into memory. For proper operation, before selecting channels, they Call menu and for example: Select Language. should be set into the memory. See “Memorizing channels”... -
Page 17: Convenience Functions
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture... -
Page 18: Memorizing Channels
Memorizing channels Adding Channel If you find a new digital channel unregistered, you can add the new channel into the channel memory. This TV is equipped with a channel memory feature which allows channels to skip up or down Tune in the new channel. to the next channel set into memory, skipping over unwanted channels. -
Page 19: Checking The Digital Signal Strength
Checking the digital If the character which you desire appears, press ENTER. signal strength Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of This TV will allow you to view the digital signal characters. -
Page 20: Setting The V-Chip
Setting the V-Chip When you select TV-Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to explain the rating. Genre: An age limitation can be set to restrict children from : Dialogue viewing or hearing violent scenes or pictures that you : Language may choose to exclude. -
Page 21: Closed Caption
NOTE: NOTE: • You can only download the additional V-Chip rating • Depending on the broadcast signal, some system when your TV is receiving a digital signal. Analog Captions will function with a Digital • When you download the additional rating system, it broadcast signal. -
Page 22: Setting The Picture Size
Cinema Wide1 (for 4:3 format programs) You can select from among the following items To fill the screen, the right and left edges are and parameters. extended, however; the center of the picture remains Text Size: Auto, Small, Standard, Large near its former ratio. -
Page 23: Time Shift
Time Shift To delete the recorded program Disconnect the USB memory, record another program, or turn off the TV. You can record a digital program by using the Note: USB memory drive. This function is for your • Time shift does not work for ATV or external inputs. If you convenience, and allows you to pause/record a change the signal while recording a program, it will stop. -
Page 24: Reception Disturbances
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. -
Page 25: Troubleshooting
Troubleshooting Use the following checklist for troubleshooting if you have problems with your TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS SYMPTOMS POSSIBLE SOLUTIONS Digital •... -
Page 26: Specifications
Specifications GENERAL Power supply: AC 120V, 60Hz Power consumption: Operation: 37W Stand by: 0.3W Weight: 3.6 kg (8.0 lbs) Dimensions: Width: 550mm (21-21/32 inches) Height: 361mm (14-15/64 inches) Depth: 137mm (5-25/64 inches) Operating temperature: 5˚C - 40˚C Operating humidity: Less than 80% RH Type: 599.4mmV (class 24 inches/23.6 inches diagonal) Display method:... -
Page 27: Limited Warranty
limited WARRANTY 24” CLASS LED-LCD HDTV ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States. Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service only by an ORION authorized Independent Service Center at no charge.