Hew To Use The Auto Mode - Samsung DIGIMAX A403 User Manual

• Changing the recording mode : if the [FULL] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE) menu.
5. The recording mode used just before wilI display.
6. Press the M (Mode) button located on the back of the camera and the mode
selection menu wilt display.
7. To selectthe Auto Program, Movie clip or Scene modes, press the Left/Right
button. To move between the Auto, Manual, Movie clip menu line and Scene
menu line, press the Up/Down button.
[Mode selection menu] [Mode selection menu]
Pressing theLeftbutton
Pressing t he Upbutton
[Selecting the Scene mode]
8. Press the M (Mode) button and the mode selectionmenu will disappear.
• How to use the Auto mode
Use this for shooting basic stillimages.
1. Select the [FULL] sub menu on the [MODE)
menu (p.12).
2. Select the Auto mode by pressingthe M (Mode)
button (p.22).
3. Pointthe camera towards the subject and
compose the image by using the LCD monitor.
4. Press the shutter buttonto capture an image. [AUTO mode]
÷ Avoid obstructing the lens or the flash when you capture an image.
• How to use the Movie clip mode
A movie clip can be recorded for as long as the available recording time of the
memory capacity allows.
1. Select the [FULL] sub menu on the [MODE]
menu (p.12).
2. Select the Movie clip mode by pressing the M
[Mode) button (p.22).
3. Point the camera towards the subject and
compose the image by using the LOD monitor.
4. Press the shutter button once and movie clips are
recorded for as long as the available recording
time allows. Movie clips will stillbe recorded if the shutter buttonis released.
If you wish to stop recording,press the shutter button again.
÷ image size and type are listed below.
- Image size : 640X480, 320X240 (user selectable)
- Movie clip file type: AVl (MJPEG)
[MOVIE CLIP mode]
(13}