White Balance; Exposure Compensation - Samsung DIGIMAX A403 User Manual

•Using the C ustom White Balance
White balance settings may vary slightly depending on the s hooting
environment. You can select the m ost appropriate white balance setting for a
given shooting environment by s etting up the c ustom white balance.
1. S elect the C USTOM (_m_ )menu of t he W hite
Balance and press the O K button.
2. P lace asheet of w hite paper in front of t he c amera
so that the L CD monitor shows only white, and
then press the S HUTER button.
3. P ress the O K b utton and your custom white
balance value is stored.
-The custom white balance value will be applied,
starting with the n ext picture you take.
-The user configured white balance will be remain
effective until itis ove_ritten.
[Whitepaper]
• Exposure compensation :This camera automatically adjusts the exposure
according to the ambient lighting conditions.
You can also select the exposure value by using the
+/- button.
• Compensating Exposure
1. Press the +/- button, and then use the UP and
DOWN buttons to select the exposure
compensation icon ( [] ). The exposure
compensation menu bar will appear as shown.
2. Usa the LEFT and RIGHT buttons to set the
desired exposure compensation factor.
3. Press the +/- button again. The value you set will
be saved and the Exposure Compensation setup mode wili close. If you
change the exposure value, the exposure indicator ( [] ) will be displayed
on the bottom of the LCD monitor.
st A negative exposure compensation value reduces the exposure.
Notethat a positive exposure compensation value increasesthe exposure
and the LCD monitor will appear white or you may not get good pictures.
_[27}