Button; Rgb; Iso - Samsung DIGIMAX A403 User Manual

•You can add 9types of f rame-like borders to astill image you want to capture.
1. P ress the E button in the p rogram mode.
2. S elect the [ ] menu tab b y pressing the L eft/Right
button.
3. S elect adesired sub menu by p ressing the U p/
Down button and press the O K button.
-_ :The photo frame will not be added.
4. T he photo frame will appear.
Press the s hutter button to capture an image
÷Before taking apicture, you can change the f rame
by p ressing the E button. Change the f rame type
by p ressing the U p/Down/Left/Right button.
•You can use the 4 -/- button to adjust the v alues for the R GB, ISO, white balance
and exposure compensation.
Main menu Sub menu Available camera mode
RGB R (Red), G(Green), B(Blue) [_ Im
ISO AUTO, 100, 200, 400 [_
AUTO, DAYLIGHT, CLOUDY,
WHITE BALANCEFLUORESCENT H, [_ Im
FLUORESCENT L,
TUNGSTEN CUSTOM.
Exposure compensation -2.0 ~0.0 _ +2.0 (0.5EV steps) _ I_
•RGB :Allows the u ser to adjust the R (Red), G (Green), and B(Blue) values of
the i mages to be captured.
• Setting RGB Values
1. Press the +/- button, and then use the UP and
DOWN buttons to select the RGB icon ( RGB)-
The RGB menu bar wilt appear as shown.
2. Use the UP/DOWN/LEFT and RIGHT buttons to
select the desired RGB value.
- Up/Down Button : Navigates between R, G,
and B icons.
- Left/Right Button : Changes value of each icon.
3. When you pressthe +/- button again, the value you set will be saved and RGB
setup mode will end.
÷ When special effect (colour) from the icon other than _ is selected, it will
not be able to selectthe RGB.
(25}