Using The Remote Control Unit; Connecting Headphones To The Dvd - Samsung DVD-L200 User Manual

,&
I ENGLISH ]
Using the Remote Control Unit
1 Remove the battery compartment in the direction of the arrow
(Back of the remote control)
Hole
2, Place the lithium battery in the battery compartment and put
the battery compartment cover back on the remote,
• Match the polarities (+ and -) on the battery with the marks
in the battery compartment. If the battery is inserted in the
wrong direction, your remote control may not work correclty
®
Important!
Do not subject the remote control unit to strong vibration or shock ___j
Keep the remote control unit free from moisture and water
coo on
• After battery replacement, your remote control unit may not work
If this occurs, remove the battery and re-insert in about 5 minutes _/
• It may be difficult to operate the remote control unit if the remote control sensor on _u_30o _
the DVD player is exposed to direct sunlight or strong artificial light _/ (Remote Control Sensor _
Try operating the remote away from such light sources _ _ _ J
• Remove the battery when not planning to use the remote control unit for a long _4_._
period of time, _.._ _, _%_J
Connecting Headphones to the DVD
You can attach headphones with a stereo mini-jack plug (not supplied) to the
PHONES jack for private listening There are two jacks available
1. Insert headphones into the PHONES jack.
• This jack is a stereo mini-jack,
t supplied
Importantl
• Turn the headphone volume down to the minimum setting before connecting
Caution
• Once you connect headphones to the DVD, your DVD Player's speakers will be disconnected
2. Adjust the volume level by using the VOLUME control dial.
IENGLISH]
A