Using The Remote Control Unit - Samsung DVD-L1200 Manual

ENGLISH

Using the Remote Control Unit

Installing the Battery in the Remote
1. Remove the battery compartment in the direction of the arrow.
(Back of the remote control)
Hole
2
1
Operating Range of Remote Control Unit
Important!
Do not subject the remote control unit to strong vibration or shock.
Keep the remote control unit free from moisture and water.
Caution
• After battery replacement, your remote control unit may not work.
If this occurs, remove the battery and re-insert.
• It may be difficult to operate the remote control unit if the remote control sensor on
the DVD player is exposed to direct sunlight or strong artificial light.
Try operating the remote away from such light sources.
• Remove the battery when not planning to use the remote control unit for a long
period of time.
16
2. Place the lithium battery in the battery compartment and put
the battery compartment cover back on the remote.
• Match the polarities (+ and -) on the battery with the marks
in the battery compartment. If the battery is inserted in the
wrong direction, your remote control may not work correctly.
30
30
(Remote Control Sensor)
Connecting Headphones to the DVD
You can attach headphones with a stereo mini-jack plug (not supplied) to the
PHONES jack for private listening. There are three jacks available.
How to use headphones
1. Insert headphones into the A, B or C PHONES jack.
• This jack is a stereo mini-jack.
Important!
• Turn the headphone volume down to the minimum setting before connecting.
Caution
• Once you connect headphones to the DVD, your DVD Player's speakers will be disconnected.
2. Adjust the volume level by using the VOLUME control dial.
ENGLISH
PHONES
Not supplied
17