Download  Print this page

Advertisement

Ad-hoc: You c an c onnect
toamobile device
without
anaccess
point through
the 'Samsung
Wireless
LAN A dapter'
by
using apeer topeer network.
Now to connect to new Ad-hoc
1. Choose Select a network, then a device list is displayed.
2. While in the device list, press the Blue button on the remote or select Ad=
hoc.
@ The message The existing network system may have limited
functionality,
Do you want to change the network connection? is
displayed.
3. Input the generated Network Name(SSID) and Security Key into the
device you want to connect.
Now to connect
an existing Ad=hoc device
1. Choose Select a network, the device list is displayed.
2. Select the device you want in the Device list.
3. If security key was applied, input the security key again.
If network doesn't operate normally, please check the Network
Name(SSID) and Security Key again. If the Security Key is incorrect,
it may be the reason for the malfunction.
Wireless
Network
Setup=Auto Setup
If you want to connect AID, A P should support DHCR Only devices which support Ad-hoc mode
can be connected without DHCR
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Auto Setup,
The Internet Protocol is set automatically.
4. Select a network through Select a network.
6. Select Network Test to check the network connectivity.
Wireless
Network
Setup=Manual
Setup
1. Set Network Type to Wireless.
2. Select Wireless Network Setup.
3. Set Internet Protocol Setup to Manual Setup.
4. Set up mP Address, Subnet Mask, Gateway and DN8 Server.
@ Press the number buttons on the remote control when you set the Network manually.
5. Select a network through Select a network.
6. Select Network Test to check the network connectivity.

Advertisement

Table of Contents

   Also See for Samsung LN52B750

   Related Manuals for Samsung LN52B750

This manual is also suitable for:

Ln46b750u1fxzaLn40b750u1f/xzaLn40b750Ln46b750Ln52b760

Comments to this Manuals

Symbols: 0
Latest comments: