Download  Print this page

Recording; Listening Through A Receiver (home Theater) - Samsung LN52B750 User Manual

Series 750.
Hide thumbs

Advertisement

"iV Remote Control Buttons Available in Anynet + Mode
Device Type
Operating Status
_
_ Available Buttons
After switching to the device, when the menu
Numeric buttons
of the corresponding device is displayed on
A/_r/4/_./ENTERIB,_
buttons
Anynet + Device
the screen.
Color buttons / EXIT button
After switching to the device, while playing a
[_](Backward search) / _](Forward
search) /
file
[_(Stop)
/ [_](Play) / _](Pause)
Device with built-in
After switching to the device, when you are
v
CH A button
Tuner
watching a TV program
Audio Device
When Receiver is activated
=VOL+
/ MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The [_
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers' products.
The [_], _
operations may differ depending on the device.
Recording
You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER _# button to select Anynet + (HDMI-CEC).
2. Press the A or T button to select Recording Immediately and press the ENTER _,_
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the A or T button to select a recording device and press the ENTER _,_
button. Recording begins.
When the recording device is not displayed select Device List and press the Red
button to search devices
3. Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
Pressing the _
button will record whatever you are currently watching. If you are watching video from another device,
the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording device's users manual.
Listening through
a Receiver (Home Theater)
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER _
button to select Anynet + (HDMI-DEC).
2. Press the A or T button to select Receiver. Press the 4 or _. button to select On or Off.
3. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the
receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from
the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home Theater receiver. When the source is a digital component such as a DVD and is
connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
failure), the Speaker Select may be set to External Speaker when you turn the TV on again.

Advertisement

Table of Contents

   Also See for Samsung LN52B750

   Related Manuals for Samsung LN52B750

This manual is also suitable for:

Ln46b750u1fxzaLn40b750u1f/xzaLn40b750Ln46b750Ln52b760

Comments to this Manuals

Symbols: 0
Latest comments: