Download  Print this page


LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,
subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).
1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
The LAN Port on the Wall
TV Rear Panel
O LAN Cable
You can connect the LAN via a Sharer (Router).
The LAN Porton the Wall
TV Rear Panel
The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must
enter these values to complete the network settings. If you do not know the values, ask your network administrator.
For the information on how to configure and connect a Sharer (Router), refer to the owner's manual for the corresponding
You can connect the TV to the LAN directly without connecting it through a Sharer (Router).
If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IR
For the procedures to use a static IP address, ask your Internet Service Provider.


Table of Contents

   Also See for Samsung LN52B750

   Related Manuals for Samsung LN52B750

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: