Download Print this page

Connecting A Vcr - Samsung LN26A450C1DXZA User Manual

Series 450
Hide thumbs Also See for LN26A450C1DXZA:

Advertisement

Available languages

Available languages

Connecting a VCR
Video
Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 14-15). Skip step 1 if you have not yet connected to an antenna or a cable system.
1,
Unplug the cable or antenna from
the back of the TV.
2,
Connect the cable or antenna to the
ANT IN terminal on the back of the
VCR.
1
1
1
Connect an RF Cable between the
ANT OUT terminal on the VCR and
the ANT IN terminal on the TV.
Connect a Video Cable between the
VIDEO OUT jack on the VCR and
theAV IN 1 [YNIDEO]
orAV IN 2
[VIDEO] jack on the TV.
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
theAV IN 1 (orAV IN 2)
[R-AUDIO-L] jacks on the TV.
>_ If you have a "mono"(non-stereo)
VCR, use aY-connector (not
supplied) to hook up to the right
and left audio input jacks of the
TV. If your VCR is stereo, you
must connect two cables.
TV Rear Panel
VCR Rear Panel
©
5.._ Audio Cable (Not supplied)
,4_ Video
Cable
(Not supplied)
.3_ RF Cable (Not supplied)
TV Side, Panel
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
Each VCR has a different back panel configuration.
>_ When connecting a VCR, match the color of the connection terminal to the cable.
:_ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does
not match the color of the video cable (Yellow).
S-Video
Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture when compared to the regular Video connection above.)
1.
To begin, follow steps 1-3 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
2,
Connect an S-Video Cable
between the S-VIDEO
OUT jack
on the VCR and the AV IN 2
[S-VIDEO] jack on the TV.
3.
Connect Audio Cables between
the AUDIO OUT jacks on the VCR
and theAV
IN 2 [R-AUDIO-L]
jacks on the TV.
VCR Rear Panel
TV Rear Panel
[_! RF Cable
(Not
supplied)
_
S-Video
Cable
(Not
supplied
Audio
Cable (Not supplied)
TV Side Panel
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
>_ Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.

Hide quick links:

Advertisement

Chapters

loading