Samsung LN26A450C1DXZA User Manual page 34

:_ Temporary image retention may occur when viewing a static image on the set
for more than two hours.
:_ After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the 4 or _- button to select "Position", then press the ENTER
button. Press the A or T button to move the picture up and down.
Reset: Press the 4 or _ button to select "Reset", then press the ENTER C_
button. You can initialize the setting.
After selecting "Just Scan" in HDIVll (1080i) or Component (1080i) mode:
Press the A or T button to select "H-Position" or "V-Position", then press the
ENTER 1:_ button.
Press the 4 or _- button to adjust the screen Position. Press the
ENTER 12_ button.
Reset: Press the A or T button to select "Reset", then press the ENTER C;_
button. You can initialize the setting.
HD (High Definition)
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
TV, Video, S-Video, 16:9, Zoom1, Zoom2, 4:3
Component (480i, 480p)
DTV(1080i), Component (1080i), HDMI 16:9, 4:3, Wide Fit, Just Scan
(720p, 1080i)
PC 16:9, 4:3
1_ Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
16:9
Sets the picture to 16:9 wide mode.
Zoom1 Zoom2
Magnifies the size of the picture on the Magnifies the size of the picture more
screen, than "Zoom1".
Wide Fit 4:3 Just Scan
Enlarges the aspect ratio of the picture Sets the picture to 4:3 normal mode. Use the function to see the full
to fit the entire screen, image without any cutoff when HDM
(720p/1080i). Component (1080i) or
DTV (1080i) signals are input.