Connecting A Vcr - Samsung LTN325W Owner's Instructions Manual

INSTALLATION
I
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-10).
Skip step 1 if you have not yet connected to an antenna or a cable system.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
if you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-
nect two cables.
in ----
t
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
# Each external input source device has a different back panel cont]guration.
English-1 1