Selecting Theantenna; Clearing Scrambled Channels - Digital - Samsung LN-T1953H Owner's Instructions Manual

Channel Control
Selecting the Antenna
1. Press the MENU button to display the menu.
Press the A or _" buttons to select "Channel"_ then press the ENTER button.
Press the ENTER button to select "Antenna".
Press the A or T buttons to select "Air" or "Cable'_ then press the ENTER
button.
Press the EXIT button to exit.
_} Pressthe ANTENNAbutton on the remotecontrol
> tf the antenna is connected to ANT 1 IN tAIR),
select "Air' and if it is connected to ANT 2 tN
CABLE_. select 'Cable".
> _ Doth ANT 1 N tAIR_ and ANT 2 IN CABLB
are connected select me antenna inpu[ you want.
tf the antenna inout is not selec[ed properly, noise
may appear on me screen
AN_NNACHLIST FA_CH SLEEP
v_ P_
Clearing ScrambJed Channels =Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes.
1. Press the MENU button to display the menu.
Press the A or _" buttons to select "Channel"_ then press the ENTER button.
Press the A or T button to select "Clear Scrambled Channel", then press the
ENTER button. It searches scrambled channels, which are to be removed from
the list.
> To stop searching scrambled channels;
Press the ENTER button to select Stop
Press the .,_ button to select Yes, then press the ENTER button.
3. When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.