Resetting The Sound Settings To The Factory Defaults; Connecting Headphones; Setting The On/Off Me Oey; Symbol - Samsung LN-T1953H Owner's Instructions Manual

Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu.
Press the A or • buttons to select "Sound", then press the ENTER button.
2. Press the A or _r buttons to select "Reset", then press the ENTER button.
Press the EXIT button to exit.
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing tile other peopte in the room.
:_ When you insertthe head set jack into the corresponding port, you can operate
only "Multi track option' in Sound menu.
> Prolonged use of headphones at a high volume may damage your hearing.
> You will not receive sound from the speakers when you connect headphones
to the system.
> The headphone volume and TV volume are adjusted differently.
[_/ Press the VOL button on the remote cordrol repeatedly to select one of the sound
settings.
MIIT_ (_o oo
Setting the On/Off Melody
A melody sound can be set to come on when tile TV is powered On or Off.
1. Press the MENU button to display the menu.
Press the A or _' buttons to select "Setup", then press the ENTER button.
2. Press the A or _r buttons to select "Melody", then press the ENTER button.
3. Press the A or _' buttons to select "Off"_ "Low"_"Medium", "High" then press the
ENTER button.
'*Low: Sets the melody volume to low.
, Medium: Sets the metody volume to medium.
', High: Sets the melody volume to high.
Press the EXIT button to exit.
DDi-_a-_] Manufactured under !ipense irom DoIbY Laboiatodes.
o _G_TA L igotby'! and the double@ symbol are trademarks of Dolby Laboratories.