To Se)Ect The Source; To Edi - Samsung LN-T1953H Owner's Instructions Manual

To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
1. Press the MENU button to display the menu.
Press theA or T buttons to select "lnput"_ then press the ENTER button.
2. Press the ENTER button to select "Source List".
Press the A or _r buttons to select signal source, then press the ENTER button.
:_ When you connect equipment to the LCD, you can choose between the
following sets of jacks: TV, AV_S-Video_Component, PC_HDMI on the TV's rear
panel.
HDMI input can only be selected when the external device is turned on and
connected via HDMI.
You can choose only those external devices that are connected to the TV.
Its)Press the SOURCE button on the remote control to view an external signal source. II _:_ER SOU(,.._ I_ 1
H
tHI
To Edit the input Source Name
Name the device connected to the input jacks to make your input source selection easier.
Press the MENU button to display the menu.
Press theA or 'V buttons to select "lnput', then press the ENTER button.
Press the A or T buttons to select "Edit Name", then press the ENTER
button.
2. Press the A or T buttons to select "AV", "S-Video", "Component"_ "PC"_"HDMI"
input jack_then press the ENTER button.
Press the & or T buttons to select "VCR", "DVD"_ "D-VHS", "Cable STB"_
"HD STB", "Satellite STB", "PVR STB"_ "AV Receiver", "DVD Receiver",
"Game", "Camcorder", "DVD Combo", "DVD HDD Recoder", "PC",
"lnternet TV Recv."_"lnteractive TV Recv/',"VOD STB"_ "TV" input source, then
press the ENTER button.
Press the EXIT button to exit.