Samsung WF209ANW User Manual page 21

High current detected.
High/Low voltage detected.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent it, cut down on detergents.
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
troub eshooting 21
WF209ANW-02440F EN.indd 21 2009-01-20 _;._1_._4:05:19