Attach Handle; Attach Hose - Eureka 5740 series Owner's Manual

CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure on/off switch is in off (0) position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.

Attach Handle

CAUTION: Do not catch cord under handle.
2
1 From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.
Attach handle with two 1 inch screws provided in
2
the assembly packet. Use a Phillips
screwdriver.
NOTE: Hand tighten with screwdriver to be sure
both screws are firmly seated.
1
1
Groove
Groove
® head

Attach Hose

3
Pick up hose and lay across upper hose retainer.
4 Push the end of the hose in the lower hose retainer to
secure.
3
Upper Hose
Retainer
4
Hose
Lower Hose
Retainer
7