How To Assemble; Attach Handle; Power Switch; How To Use - Eureka 400 Series Owner's Manual

HOW TO ASSEMBLE

Attach Handle

1. Locate the handle and body.
2. Line the handle up with the hole in the
top of the body. Flat side of handle and
loop forward.
3. Push handle down into body while
pressing button on back of the body.
Handle will click into place.
4. There are two handle positions available.
Handle all the way up and handle all the
way down.
5. Button needs to be depressed to raise
and lower the handle.

HOW TO USE

Power Switch

The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Power
Switch
Dual Uses
Push the handle button to release
lock. The handle will slide freely until
it fi nds one of the two available handle
positions. It automatically locks in either
of these two positions.
With the handle collapsed, the unit is
great for stairs and compact storage.
With the handle extended, the unit is
great for fl oor cleaning.
Body
Nozzle with Edge Kleener
Airfl ow under the nozzle automatically directs
suction to the edges and corners for maximum
full width cleaning.
Experiment with your hard fl oor surfaces,
sometimes it is best to have brush roll
turning. (Switch in the carpet position).
Stair Stair
Cleaning Cleaning
Handle Handle
Loop
Handle
Button
®
5 5