Hardware Installation - Audiotrak MAYA EX7 User Manual

4. Hardware Installation

Before you begin, make sure you have to read your computer's manual on installing
USB devices. Your computer's manual should describe the precautions you should take.
Shutting down computer wouldn't need for installing an USB device to the computer.
However, we will take it from the start to make sure you can follow every detail
installation.
1. Turn off the computer.
Find USB port on your computer. USB port is looked like below. You can find it
2.
by the PS/2 or serial ports on the back of desktop computer system
3. Plug in the MAYA EX7's USB cable (Series A plug type) to the USB port of
your computer.
4. Turn on the computer. You can see on red light on the MAYA EX7's body and
Optical output. The MAYA EX7 gets the power from the computer via USB
cable so you don't need to attach any external power supplier.
After finishing connection between the MAYA EX7 and your computer, you
5.
need to connect from the MAYA EX7's 8 RCA outputs to your external devices
such as mixers or Multi-track recorder.
USB port on computer
USB series A plug
6
.