Hardware Installation; System Requirements - Audiotrak INCA88 Manual

The INCA88 requires a 3-step installation: 'PCI card installation', 'Connection to an external
device,' and finally 'Driver installtion.' The 'PCI card installation' step involves placing the
INCA88 PCI card into the PCI slot and connecting it to the included breakout box. In the
'Connection to an external device' step, you will understand how to connect the INCA88 to other
devices such as a mic, amp, mixer, and a recording device such as an MD or DAT player. 'Driver
installation' is having the operating system in your computer recognize the INCA88 and building
the communication channel.

1. SYSTEM REQUIREMENTS

To take advantage of the INCA88 and its full capacity, the computer specifications are very
important. Even though the INCA88 is built to have low-CPU dependability, the computer needs
to meet some requirements in order to get maximum performance. The INCA88 is not just a
simple soundcard, but a multimedia digital audio device with various functions. Therefore, the
performance of the INCA88 is affected by the computer specs that are required to process the
vast amount of digital data. A faster CPU, faster hard disk, and larger amounts of RAM are
recommended.
Minimum System Requirement
1. Intel Pentium II CPU or equivalent AMD CPU
2. 64MB of RAM
3. One available PCI slot
4. Microsoft Windows 98/ME/2000/XP operating system

2. Hardware Installation

10
INCA88