Connectors; Hardware Installation - Audiotrak Prodigy HD2 User Manual

AUDIOTRAK Prodigy HD2

3. Connectors

1) Stereo Line Output (left / right), provides the main output signal via RCA connectors
2) Headphone Output (stereo 1/8")
3) Line In, analog input connector (stereo 1/8"), the main input
4) S/PDIF Digital Output, via Toslink connector
5) internal Aux Input (stereo, 4 pin)

4. Hardware Installation

Prodigy HD2 and other components in the
computer could easily be damaged by electrical
shocks. You should use an anti-static device that
can discharge the static electricity of your body to
avoid potential static damage to the cards.
The Prodigy HD2 card is shipped in an anti-static
plastic pouch to protect it from static electricity -
do not open the pouch before you install the card.
Before installing the card, you might need to replace the standard metal bracket (attached to the
card in the picture above) with the low profile bracket (shown on the right), depending on the
computer case and the type of the PCI slot in your computer.
1. Turn off the computer power and remove the power cable from your computer power supply.
5