Making Prints From Your Digital Camera; Connecting And Printing - Epson Stylus Photo RX640 series Basic Operation Manual

Making Prints From Your Digital Camera

PictBridge and USB DIRECT-PRINT let you print your
photos by connecting your digital camera directly to
the EPSON STYLUS PHOTO RX.

Connecting and Printing

Make sure your camera is compatible with PictBridge
or USB DIRECT-PRINT and your photos meet the
following requirements.
File format JPEG
80 × 80 pixels to 9200 × 9200 pixels
Resolution
1. Remove any memory cards from the EPSON
STYLUS PHOTO RX. (If you leave a card inserted,
photos will be read from it instead of the card in
your camera.)
2. Press the q Setup button.
3. Use the u or d button to select PictBridge Setup,
then press the r button.
4. Use the LCD screen to select the print settings (&
page 17).
5. When you finish selecting your print settings,
press OK.
6. Connect the USB cable that came with your
camera to the EXT. I/F USB port on the front of the
EPSON STYLUS PHOTO RX.
EXT. I/F USB
port
7. Load the type of paper you want to print on (&
page 4).
8. Make sure your camera is turned on.
9. Use your camera to select the photos you want to
print, adjust any necessary settings, and print
your photos. See your camera's manual for details.
Note:
❏ If your camera is not compatible with PictBridge or USB
DIRECT-PRINT, you will see a message saying that the
connected device cannot be used. Epson cannot guarantee
the compatibility of any cameras.
❏ Some of the settings on your digital camera may not be
reflected in the output.
Making Prints From Your Digital Camera
29