Printing From A Digital Camera; Connecting And Printing - Epson Stylus DX4250 Basic Operation Manual

Printing From a Digital Camera

PictBridge and USB Direct Print let you print your
photos by connecting your digital camera directly to
the EPSON STYLUS DX.

Connecting and Printing

Make sure your photos meet the following
requirements.
File Format JPEG files
Image Size 80 x 80 pixels to 9200 x 9200 pixels
1. Make sure your EPSON STYLUS DX is not
printing from a computer.
Note For EPSON STYLUS DX4800 Series users:
Remove any memory cards from the EPSON STYLUS DX,
then press the Memory Card button until the Print
All/DPOF/PictBridge light comes on.
2. Load the type of paper you want to use (& Page
5). Load enough sheets for the number of photos
you want to print.
3. Select Plain Paper or Photo Paper (whichever
you loaded). If you select Photo Paper, the photos
print borderless, to the edge of the paper.
Select A4, 10 × 15(4" × 6"), or 13 × 18(5" × 7") as
4.
the paper size.
5. Connect the USB cable that came with your
camera to the external device USB connector of the
EPSON STYLUS DX.
6. Make sure your camera is turned on and use it to
select the photos you want to print, adjust any
necessary settings, and print your photos. See
your camera's manual for details.
Note:
❏ If your camera is not supported by this product, a double
flashing P appears in the Copy window, and the
flashes. For the DX4800 Series the Print
All/DPOF/PictBridge light also flashes. Epson cannot
guarantee the compatibility of any cameras.
❏ Depending on the EPSON STYLUS DX and the digital
camera settings, there may be some combinations of paper
type, size, and layout that are not supported.
❏ Some of the settings on your digital camera may not be
reflected in the output.
Printing From a Digital Camera
b
Error light
13